[Company Logo Image]

Home Up Feedback Order Quote Search

Door Operators

[Under Construction]

Home
Up
Activators
BiFold Doors
Conversions
Fire Doors
Door Operators
Sensors
Slide Doors
Windows


NABCO (GYRO TECH) - AUTOMATIC DOOR OPERATORS

GT System 300 Overhead Concealed

The GT System 300 can work all day, handling the heaviest pedestrian traffic patterns, and you won't even know it's there!

New at this time are equipment options that enable the construction and operation of the door to be more closely tailored to your needs and budget. The door control package can be set up to comply with ANSI standards with mats, Acusensor or Acuswing sensor packages. The controller can be the basic electronic control or there are two options for microprocessor controls for expanded flexibility in the setup and door operation. A new mechanical operator offers new opportunities for smooth operation with the microprocessor controllers.

With easily replaceable components, down time is minimized, should service be required. The GT 300 OHC supports the door independently on heavy-duty steel top and bottom pivots, eliminates the need for door removal if the operator requires servicing. The door opens with a drive arm and linkage assembly, putting it head and shoulders above shaft driven systems in performance, reliability, serviceability and low total cost of ownership.

gyrotech500.JPG (16175 bytes)Dual-Access GT System 500

When you need to conquer rush-hour traffic and meet the access needs of the elderly and physically challenged, give the job to the GT System 500.

The System 500 is a sturdy, durable, dual-access unit that provides both automatic and manual operation. It includes two automatic options: Standard Automatic, with an open/close time of 18 to 20 seconds; and Optional Speed, which provides an energy saving 8- to 10- second cycle. Both options allow an adjustable hold-open range of 0 to 60 seconds to meet your specific needs.

In the manual mode, the door opens with less than 12 pounds of pressure, and spring closes slowly to ensure safety. The System 500 meets the access requirements of ANSI 156.19, and can be fitted to your existing door, making it easy to install and maintain.

Handling heavy traffic is all in a day's work for the GT System 500!

Also available in Overhead Concealed (OHC) Configuration.

gyrotech710.JPG (16081 bytes)GT System 700 and 710 Gemini

Making Life Easier Every Day

Both the GT 700 and GT 710 feature:
An automatic recycle feature to safely stop, then close the door if an obstruction encountered.
A "Push N GOD feature for automatic opening of the door completely when activated by a pedestrian.
Optional. fully automatic operation by various activating devices.
Optional, one or two door automatic operation on pairs of doors for lower cost.
Easy manual mode operation with door closer in event of power failure.
Adjustable closing speeds for safety and energy savings.

The GT 710 offers all of the above features of the more economical GT 700, plus has an adjustable and heavy duty door closer and larger chain drive. This offers the flexibility to adjust the closing pressures as needed for specific site conditions and the larger chain when increased pressures are required.

AR features, components and accessories meet ANSI 156. 19 and comply with the Low Energy Operator section of ADA. AR Gyro Tech products have a one-year limited warranty. AR products shall be guaranteed to be free of defects in material or workmanship for a period of one year.

The GT System 700 and 710: Safe, convenient, affordable.

 Recycle features may be affected by windy conditions.

 

Home ] Up ] Activators ] BiFold Doors ] Conversions ] Fire Doors ] [ Door Operators ] Sensors ] Slide Doors ] Windows ]

Send mail to webmaster@autodoorsystems.com with questions or comments about this web site.
Copyright © 1999 Automatic Door Systems
Last modified: February 14, 1999